Modeling of flowing film concentrators: Part 1. Water split behaviour     

A.K. Majumder  G.J. Lyman  M. Brennan  P.N. Holtham 《International Journal of Mineral Processing》2006

A large number of mineral processing equipment employs the basic principles of gravity concentration in a flowing fluid of a few millimetres thick in small open channels where the particles are distributed along the flow height based on their physical properties and the fluid flow characteristics. Fluid flow behaviour and slurry transportation characteristics in open channels have been the research topic for many years in many engineering disciplines. However, the open channels used in the mineral processing industries are different in terms of the size of the channel and the flow velocity used. Understanding of water split behaviour is, therefore, essential in modeling flowing film concentrators. In this paper, an attempt has been made to model the water split behaviour in an inclined open rectangular channel, resembling the actual size and the flow velocity used by the mineral processing industries, based on the Prandtl's mixing length approach.  相似文献   

地缘经济关系测度与分析的理论方法探讨--以云南省为例   总被引：12，自引：0，他引：12  

张学波  武友德  骆华松 《地域研究与开发》2006,25(4):34-39

文章首先简要分析了地缘经济学的发展进程和研究内容，提出以保护国家利益增强综合国力为主要研究目的的地缘经济理论在一定程度上可以指导不同级别区域经济合作策略的制定。然后在探究了地缘经济关系涵义的前提下，设计了地缘经济关系的测度体系，并用该方法对云南省地缘经济关系进行了数量测度和类型判别，进而对该省地缘经济关系进行了分析和评价，对经济发展提出了建议。  相似文献   

Short-term beach–dune sand budgets on the north sea coast of France: Sand supply from shoreface to dunes, and the role of wind and fetch     

Edward J. Anthony  Stphane Vanhee  Marie-Hlne Ruz 《Geomorphology》2006,81(3-4):316-329

Three experimental plots, covering the transition from the upper beach to the dune, on the North Sea coast of France were monitored at various intervals over a period of 18–24 months via high resolution terrain surveys in order to determine inter-site sand budget variability, as well as patterns and processes involved in sand exchanges between the upper beach and dune. The wind regime consists of a fairly balanced mix of moderate (80% of winds are below 8 m/s) onshore, offshore and shore-parallel winds. Sustained dune accretion over several years depends on the periodic local onshore welding of shoreface tidal banks that have developed in the storm- and tide-dominated setting of the southern North Sea. The only site where this has occurred in the recent past is Calais, where bank welding has created a wide accreting upper beach sand flat. At this site, significant sand supply from the subtidal sand bank reservoir to the upper beach flat occurred only once over the 18-month survey following a major storm. The bulk of the sand deposited over this large flat is not directly integrated into the adjacent embryo dunes by onshore winds but is progressively reworked in situ into developing dunes or transported alongshore by the balanced wind regime, thus resulting in alongshore stretching of the embryo dune system. The Leffrinckoucke site near Belgium shows moderate beach–dune mobility and accretion, while the Wissant site exhibits significant upper beach bedform mobility controlled by strong longshore currents that result in large beach budget fluctuations with little net budget change, to the detriment of the adjacent dunes. Accretion at these two sites, which are representative of the rest of the North Sea coast of France, is presently constrained by the absence of a shore-attached sand bank supply reservoir, while upper beach–dune sand exchanges are further limited by the narrow wave-affected upper beach, the intertidal morphology of bars and troughs which segments the aeolian fetch, and the moderate wind energy conditions. The balanced wind regime limits net sand mobilisation in favour of either the beach or the dune, and may explain the relatively narrow longshore morphology of the dune ridges bounding this coast.  相似文献   

A greenhouse study on root dynamics of cactus pears, Opuntia ficus-indica and O. robusta     

H.A. Snyman   《Journal of Arid Environments》2006,65(4):529-542

Over the last 10 years a great interest in spineless cactus pear was shown in the drier areas in terms of both fresh fruit and fodder production. However, there is a lack of knowledge on quantitative data on root dynamics of these plants needed to fully understand its potential under water limiting conditions. This study aimed at quantifying the effects of water stress on the growth of tap roots, side roots and rain roots of the species Opuntia ficus-indica (L.) Miller (cultivar Morado—green cladode) and O. robusta Wendl. (cultivar Monterey—blue cladode). One-year-old cladodes were planted in root boxes and pots (2002/2003 season) that were kept in the greenhouse at day/night temperatures of 25–30 °C/15–18 °C. Placing the cladodes flat on the soil, more areoles came in contact with the soil and therefore more roots developed in both species with an average of only 3.4% areole complexes not rooting. Each areole complex formed on average 3 roots. The highest daily tap root growth was 42 and 36 mm for O. ficus-indica and O. robusta, respectively. Tap root growth increased in the morning with water stress for both species but decreased in the afternoon. Side root growth increased with water stress, with that of O. robusta more per tap root than O. ficus-indica. O. robusta showed a finer root system than O. ficus-indica. The side roots grew as much as 8 and 5 mm per day for O. ficus-indica and O. robusta, respectively. Whitish rain roots developed on the established roots within the first hour after rewetting the soil and grew for only 3 days. Rain roots grew up to 7 and 5 mm within a day for O. ficus-indica and O. robusta, respectively. Considering all studied aspects of their roots systems, O. robusta appears to be better adapted to drought (less sensitive to water stress) than O. ficus-indica.  相似文献   

Optimization of SAGD Well Elevation     

Jason A. McLennan  Weishan Ren  Oy Leuangthong  C. V. Deutsch 《Natural Resources Research》2006,15(2):119-127

The application of steam-assisted gravity drainage (SAGD) to recover heavy oil sands is becoming increasingly important in the northern Alberta McMurray Formation because of the vast resources/reserves accessible with this mechanism. Selecting the stratigraphic elevations of SAGD well pairs is a vital decision for reservoir evaluation and planning. The inherent uncertainty in the distribution of geological variables significantly influences this decision. Geostatistical simulation is used to capture geological uncertainty, which is used can be transformed into a distribution of the best possible well pair elevations. A simple exhaustive calculation scheme is used to determine the optimum stratigraphic location of a SAGD well pair where the recovery R is maximized. There are three basic steps to the methodology: (1) model the uncertainty in the top continuous bitumen (TCB) and bottom continuous bitumen (BCB) surfaces, (2) calculate the recovery at all possible elevation increments within the TCB and BCB interval, and (3) identify the elevation that maximizes R. This is repeated for multiple TCB/BCB pairs of surfaces to assess uncertainty. The methodology is described and implemented on a subset of data from the Athabasca Oilsands in Fort McMurray, Alberta.  相似文献   

Effect of sampling and linkage on fault length and length–displacement relationship     

S-S. Xu  A. F. Nieto-Samaniego  S. A. Alaniz-Álvarez  L. G. Velasquillo-Martínez 《International Journal of Earth Sciences》2006,95(5):841-853

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.  相似文献   

笼状水合物拉曼光谱特征与结构水合数的耦合关系   总被引：3，自引：0，他引：3  

雷怀彦  官宝聪  刘建辉  李震 《现代地质》2005,19(1):83-88

为了探讨不同气体组分和环境介质对形成笼状结构类型水合物和水合数的影响, 开展了一元体系 (CH4、CO2、C3H8 )和二元体系(CH4 +CO2、CH4 +C3H8、CH4 +N2 )的水合物生成结晶充填过程、结晶构型和动力学特性分析, 并对生成的水合物进行了拉曼光谱分析。结果表明单组分甲烷充填小孔穴 512和大孔穴 512 62 形成Ⅰ型笼状结构水合物(SⅠ), 二氧化碳和丙烷只占据大孔穴 512 64 形成Ⅱ型笼状结构水合物 (SⅡ ); 而二元混合组分中小孔穴中只充填有甲烷, 而没有CO2、N2 和C3H8。应用反褶积的ν1 对称谱带测定了CH4 分子在Ⅰ型结构大孔穴和小孔穴中的相对占有率,并根据谱带的面积比(对应于小孔穴与大孔穴)计算了平衡条件下甲烷水合物孔穴占有率及其耦合的水合数, 认为气体分子的大小不仅影响它所充填的孔穴形态和类型, 而且影响水合物生成的结构类型和水合数。  相似文献   

渗透系数空间变异性研究   总被引：20，自引：6，他引：20       下载免费PDF全文

施小清  吴吉春  袁永生 《水科学进展》2005,16(2):210-215

水文地质参数的空间变异性是随机理论研究的基础,而渗透系数是最为重要的水文地质参数。国外有关渗透参数空间变异性的研究工作已开展很多,但渗透系数究竟服从什么分布目前尚无确切答案。利用Borden含水层试验数据,对渗透系数的空间变异性进行探讨,结果表明若处理方法得当,渗透系数应服从对数正态分布。同时,还对今后野外开展含水层渗透系数空间变异性试验研究提出几点建议。  相似文献   

台风活动对副热带高压位置和强度的影响   总被引：9，自引：7，他引：9  

李春虎  黄福均  罗哲贤 《高原气象》2002,21(6):576-582

利用一个浅水模式，实施了6组时间积分为4－5个模式日的试验，研究了台风对副热带高压中心位置及强度的影响。结果表明：台风和副热带高压的相互作用可以使高压中心位置西移,强度增加。据此讨论了台风活动和西北地区东部干旱之间统计联系的可能机制。  相似文献   

断层周围的弹塑性区及其地质意义   总被引：9，自引：1，他引：9  

武红岭  张利容 《地球学报》2002,23(1):11-16

采用弹塑性有限单元方法 ,通过模拟符合实际状况的逐步加载过程所引起应力场和塑性形变区的研究 ,得出如下结果 :①在塑性或韧性剪切形变情况下 ,断裂或形变带的共轭剪切角往往大于 4 5° ;②在双向挤压应力条件下 ,先存断裂的前缘部位没有拉伸应力存在 ,但可能有伸展形变发生 ;③与最大主压应力夹角为 3 0°～ 90°的断层前缘是偏应力的优势方位 ,容易发生塑性剪切形变 ,特别是夹角为 60°左右的断层是最易发生新的构造活动的断层 ;④多数断层两侧一定范围内以及断层内部是相对的低应力区。这些应力的低值区 ,非常有利于矿液和油气的运移、聚集和成藏。  相似文献